Electric Automation Forum
Forum » General Discussion » Looking for Dc Motor manufacturer that can supply motor for hydraulic pump
Topics: Looking for Dc Motor manufacturer that can supply motor for hydraulic pump on General Discussion
#1
Start by
Moshe Marlov
03-24-2014 11:01 AM

Looking for Dc Motor manufacturer that can supply motor for hydraulic pump

Specification of BRUSH 24Vdc 3Kw
Output Power: 3000W
Voltage: 24Vdc +/- 15_20%
Excitation mode: Permanent Magnet preferred (Not a must)
Speed: 2000 rpm
IP Class: IP55
Service: S2-60 Minutes continues operation.
Over Temp, Protection included:
Options to choose, for thermal sensor to limit the temperature at 90°C,
Or 110°c or 130°c (included one of them).
Operating Temperature: H class max at 155°c
Normal operating Temperature between 80-90°c
Max Current: 180Amp.
Quantity of motor up to 50 motors in year time .
03-24-2014 01:45 PM
Top #2
Byeng hui Kang(강병희)
03-24-2014 01:45 PM
How much is your target price?
What is used it? (used car?)
03-24-2014 04:31 PM
Top #3
Moshe Marlov
03-24-2014 04:31 PM
The use is hydraulic pump for crane to run on truck battery will the main diesel engine is not running
Average price around 1000 to 1200 euro EX works
03-24-2014 07:24 PM
Top #4
Byeng hui Kang(강병희)
03-24-2014 07:24 PM
thank you for your answer.
My company is a big company in korea and Quantity of motor up to 50 motors in year time is a little quantity & amount of money. so, I'm so sorry that It is difficult to produce in my company.
but I can introduce you to a professional electric motor company in korea. May I introduce you another electric motor company?
03-24-2014 10:03 PM
Top #5
wangsheng sun
03-24-2014 10:03 PM
Hello, Sir,

We are producing a lot DC Motors, PM or BRUSHLESS, we should be able to produce such motors for you.can you email me detailed specifications and drawings to : sales@fastechcn.com/
03-25-2014 12:19 AM
Top #6
Barış Kemençe
03-25-2014 12:19 AM
Hello sir ,

We manufacture this kind of motors in Turkey. If you send me an email i can help you. (baris@femsan.com)
03-25-2014 02:24 AM
Top #7
Dan Tolstrup
03-25-2014 02:24 AM
Hi Moshe.
WEG can help you with this motor.
Please contact our local office and send my regards and they will take good care off you.
Web page is web.net.

Best regards
Dan Tolstrup
Reply to Thread