Electric Automation Forum
Forum » General Discussion » Which is the best option to go with? » Reply Thead
Post reply to: Which is the best option to go with? in General Discussion


Your name:



Put the result (4 * 5) in      

Start by
Kamran Yusuf
09-03-2014 12:37 PM

Which is the best option to go with?

A) Using a turbine with higher RPM and then using reduction gears to bring it down the RPM equal to the alternator. (from 22,000 to 1500 RPM)
B) Using a turbine having equal RPM as an alternator. (1500-1600 RPM to compensate any losses or anything)
Gozuk © 2025 All Right Reserved
Contact | Terms