Electric Automation Forum
Forum » General Discussion » Design the water flow rate to cool a steam santized Jacketed vessel » Reply Thead


Your name:



Put the result (1 * 4) in      

Start by
Kishore Ravindran
03-26-2014 06:01 AM

Design the water flow rate to cool a steam santized Jacketed vessel

Steam is used to sanitize a vessel, and the vessel is having the following safety equipments , Pressure vacuum vent valve , Vacuum vent valve . Pressure vaccum vent valve set @100 mbar and the vacuum vent valve set@120 mbar . The VVV is interlocked to the control panel and opening of VVV disturbs the entire system. The Utility flow rate has to be designed in a such a manner that the Vacuum vent valve is never opened while cooling.